Download Manual  
UR5 8400

Programming Codes:

Select the manufacturer of your device from the list. The codes will appear below the list boxes.

Not all manufacturer brands listed may be compatible with this remote.
TV:         
 

DVD Player:    
 

Blu-ray Player:  
 

 

  See additional devices.

Spectrum Receiver:  
 

VCR:  
 
 

Three-Digit Code Programming Method

Your remote can be programmed by pressing a three-digit code that corresponds to particular manufacturers and brands of Audio/Video equipment.

  1. Turn on the equipment you want to program. (TV, VCR, DVD or AUX).
  2. Press the DEVICE button (TV, VCR, DVD or AUX) to be programmed and SELECT button simultaneously for 3 seconds. When the devices LED turns on it's ready to be programmed.
    1. The LED will turn on for 20 seconds. The next step must be completed while the LED is on.
  3. Point the remote control toward the equipment and enter the three-digit code number assigned to your brand from the code tables above.
    • The equipment will turn off when the right three-digit code has been entered. You can verify that you've chosen the correct code by pressing the POWER button. The equipment should turn on or turn off.
      If there is more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.
    • Store the three-digit code number by pressing the same DEVICE button again. The device LED will blink twice to confirm that the code has been stored.
Try all the functions on the remote control. If any of the functions don't work, repeat from Step 2 using the next three-digit code number from the same brand list.

Auto-Search Method

If the three-digit code numbers assigned to your brand don't turn off your equipment or the code tables don't list your brand, you can use the Auto-Search method to find the right three-digit code number for your equipment by following these steps:

  1. Turn on the equipment.
  2. Press the DEVICE button (TV, VCR, DVD or AUX) to be programmed and the SELECT button simultaneously for 3 seconds. The device's LED will turn on.
    • The LED will turn on for 20 seconds. The next step must be entered while LED is on.
  3. Press the CH+ or CH- button one at a time or keep it pressed. Release the CH+ or CH- button as soon as the equipment turns off.
    • You can check to see that you selected the right code by pressing the POWER button. The equipment should either turn on or turn off.
  4. Press the same DEVICE button to store the code. The device LED will blink twice to confirm that the code has been stored.

Find the Three-Digit Code Stored in the Device

  1. Press the DEVICE button (TV, VCR, DVD or AUX) you want to verify and the SELECT button simultaneously for 3 seconds. The device LED will turn on.
    • The device LED will turn on for 20 seconds. The next step must be entered while the LED is on.
  2. Press the INFO button. The device LED will blink number of times indicating the number of each digit of the code number. Each digit is separated by a 1-second interval of the LED being turned off.
    Example: one blink, three blinks and eight blinks with an interval of 1 second of LED being turned off, indicates the code 138. Ten blinks is equal to the number 0.